Editing A User's Access Level - Symmetricom TimeProvider 1000 User Manual

Chapter 4 Provisioning the TimeProvider
Managing the User List
The response format is:
<cr><lf><lf>
^^^sid^date^time<cr><lf>
M ^ctag^COMPLD<cr><lf>
^^^"username,access"<cr><lf>
^^^"username,access"<cr><lf>
^^^"username,access"<cr><lf>
;
Response
<username>
<access>
Sample Command
RTRV-USER-SECU::TS1000;
Normal Response
M TS1000 COMPLD
;

Editing a User's Access Level

Use the following TL1 command to change the access level for a specified user.
ED-USER-SECU:[<tid>]:<uid>:[<ctag>]::<keyword>=<value>;
This command always has a access level of SECURITY.
Parameter <keyword>
<uid>
ACCLVL
Sample Command
ED-USER-SECU::TECHNICIAN:TS1000::ACCLVL=ADMIN;
This command changes the access level for the TECHNICIAN user to ADMIN.
94 TimeProvider User's Guide
.
.
.
Up to 20 case- insensitive characters
NONE | USER | ADMIN | SECURITY
TP-SSU 03-10-24 10:31:31
"TECHNICIAN,USER"
"DEPTHEAD,SECURITY"
"DAVID,ADMIN"
Up to 20 case-insensitive characters
NONE | USER | ADMIN | SECURITY
Value
<value>
097-58001-02 Revision C – August 2005
Description
Assigned user name
Access level
Description
Assigned user name
New access level for
the specified user