Displaying The Configuration Of The Timeprovider - Symmetricom TimeProvider 1000 User Manual

Normal Response
M 2 COMPLD
;
Normal Response Format
<cr><lf><lf>
^^^sid^date^time<cr><lf>
M^<ctag>^COMPLD
^^^"<aid>,<aidtype>:ntfcncde,condtype,srveff,ocrdat,ocrtim
<:condscr>"<cr><lf>*
;
where * indicates zero or more of the preceding element

Displaying the Configuration of the TimeProvider

Use the following TL1 command to display the current equipment parameters. You
can display the parameters for the following components: SYS, COM, IOC, GPS,
PRS, INP, and OUT.
RTRV-EQPT:[<tid>]:<aid>:[<ctag>]::<keyword>;
This command has a default access level of USER.
Response
<aid>
<keyword>
<value>
Sample Command
RTRV-EQPT::IOC1:TS1000::IOCMODE;
This command causes the TimeProvider to return the current operating mode for IOC1.
Normal Response
M
;
097-58001-02 Revision C – August 2005
TP-SSU 03-10-24 11:28:02
"INP1,T1:MJ,ALM,NSA,03-10-24 11-26-47"
The access identifier for the equipment component (SYS, COM,
IMC, IOC, GPS, PRS, INP, or OUT)
The specific equipment parameter you requested See the
TimeProvider TL1 Reference Guide for details on the available
keywords.
The current setting of the requested equipment parameter.
TP-SSU 03-10-24 11:30:42
TS1000 COMPLD
"IOC1:IOCMODE,ACTIVE"
Chapter 4 Provisioning the TimeProvider
Description
TimeProvider User's Guide 129
System Commands