Retrieving Current Alarm Settings - Symmetricom TimeProvider 1000 User Manual

Chapter 4 Provisioning the TimeProvider
Provisioning Alarms
Autonomous Message
A 1192 REPT EVT
DELAY HAS CHANGED\""
;

Retrieving Current Alarm Settings

You can display the current settings for any alarm using the RTRV-ATTR command.
RTRV-ATTR:[<tid>]:<aid>:[<ctag>][::<keyword>];
This command always has a access level of USER.
<aid>
SYS
SYS
IMC
IOC
PRS
INPp (p = 1 | 2)
ALL (or null)
Response Format
<cr><lf><lf>
M
;
Field
<aid>
122 TimeProvider User's Guide
TP-SSU 03-10-24 11:18:00
"SYS,EQPT:NA,CLRDELAY,NSA,03-10-24 11-18-00:\"INPUT CLEAR
<keyword>
ELEVTIME
Alarm ID
ALL (or null)
sid date time<cr><lf>
ctag COMPLD<cr><lf>
"<aid>:event id,alarm level"<cr><lf>
"<aid>:event id,alarm level"<cr><lf>
.
.
"<aid>:event id,alarm level"<cr><lf>
The aid specified in the command
Description
System Level
ENABLE | DISABLE
The Alarm ID is described
in Provisioning the Alarm
Levels, on page 114
Returns all of the alarm
attributes
Description
097-58001-02 Revision C – August 2005