Purpose Of This Guide; Who Should Read This Guide; Structure Of This Guide - Symmetricom TimeProvider 1000 User Manual

How to Use This Guide

Purpose of This Guide

The TimeProvider User's Guide describes the procedures for unpacking, installing,
using, maintaining, and troubleshooting the Symmetricom TimeProvider. It also
includes appendixes that describe default values and how to install the included
software application SynCraft.

Who Should Read This Guide

Chapter 1, Overview of the
Procedures, are written for non-technical audiences who need general information
about the product.
contain technical information about the product. Other chapters and appendixes
describe installation, maintenance, and configuration instructions or details primarily
intended for qualified maintenance personnel.

Structure of This Guide

This guide contains the following sections and appendixes:
Chapter, Title
Chapter 1, Overview of the
TimeProvider
Chapter 2, Engineering and
Ordering Procedures
Chapter 3, Installing the
TimeProvider
Chapter 4, Provisioning the
TimeProvider
Chapter 5, Testing the
TimeProvider
Chapter 6, Maintaining and
Troubleshooting the TimeProvider
Chapter 7, Specifications of the
TimeProvider
Appendix A, Factory Default
Values
Appendix B, CRAFT Software
Reference
Index
xiv TimeProvider User's Guide
TimeProvider, and
Chapter 3, Installing the TimeProvider
Provides an overview of the product, describes the major
hardware and software features, and lists the system
specifications.
Lists the part number and ordering procedure for all
TimeProvider parts and accessories.
Contains procedures for unpacking and installing the product.
Describes the TL1 commands required to provision the
TimeProvider after installing the unit.
Provides checklist-based commissioning tests that should be
performed after completing turn-up and software configuration
to ensure the system is ready for normal operation.
Contains preventive and corrective maintenance, and
troubleshooting procedures for the product.
Lists the specifications for the TimeProvider
Includes a list of the factory default values for hardware and
software parameters.
Describes how to use the CRAFT software interface with the
TimeProvider.
Provides references to individual topics within this guide.
Chapter 2, Engineering and Ordering
and subsequent chapters
Description
097-58001-02 Revision C – August 2005