Chapter 2 Engineering and Ordering Procedures
Ordering and Parts List
Ordering and Parts List
All IOCs, IMCs, and Input and Output Connector modules are sold separately. Use
Table 2-5
to identify the available TimeProvider shelf types.
Table 2-5. TimeProvider Shelves
1000
Front Access Main Shelf
1000
Front Access Expansion Shelf
1100
Rear Access Main Shelf
1100
Rear Access Expansion Shelf
Accessories, Tools, and Equipment
You need to supply the following tools and materials for installing and testing the
TimeProvider:
Phillips-head screwdriver for installing the TimeProvider shelf in a rack
ESD wrist strap for installing cards
Digital multimeter (Fluke 77 or equivalent) for verifying power connections to the
shelf
Laptop computer with communications software such as HyperTerminal,
ProComm Plus, etc. for provisioning the TimeProvider
(Optional) Dual-channel oscilloscope with 100 MHz minimum bandwidth for
verifying that clock input and output signal(s) are within the specified voltage
range, and for checking output waveforms
DB-9 M to DB-9 F cable for connecting to the local Craft port
DB-25 M connector for alarms
Soldering iron and solder and appropriate cable for building power and alarm
connectors
46
TimeProvider User's Guide
Model
8 to 32
(1 to 4 Output Connector modules)
8 to 64
(1 to 8 Output Connector modules)
8 to 32
(1 to 4 Output Connector modules)
8 to 64
(1 to 8 Output Connector modules)
Outputs
097-58001-02 Revision C – August 2005
Part Number
990-58001-01
990-58002-01
990-58101-01
990-58102-01