Making Input Connections; Input Connector Modules Available For The Ioc - Symmetricom TimeProvider 1000 User Manual

Making Input Connections

You connect the input signals to the TimeProvider using one of the Input modules
listed in Table
Table 3-2. Input Connector Modules Available for the IOC
Item Number
090-58061-01
090-58061-02
090-58061-03
090-58061-04
090-58061-05
090-58061-06
Installing the Input Module
Attach the Input module to the shelf and secure it by tightening the screws on each
side of the module.
Figure 3-7. BNC Input Module
097-58001-02 Revision C – August 2005
3-2. Connect the Input module to the shelf before you attach cables.
Description
BNC Input module
Wire-wrap Input module
DB9 Input module
BT43 Input module
Metric (Siemens) 1.0/2.3
Input module
Metric (Siemens) 1.6/5.6
Input module
Chapter 3 Installing the TimeProvider
Alarm Connector
DB-25 (see Table 3-6)
Wire-wrap
DB-25 (see Table 3-6)
DB-25 (see Table 3-6)
DB-25 (see Table 3-6)
DB-25 (see Table 3-6)
TimeProvider User's Guide
Making Connections
Reference
Figure 3-7
Figure 3-8
Figure 3-9
Figure 3-10
Figure 3-11
Figure 3-11
57