Chapter 4 Provisioning the TimeProvider
System Commands
System Commands
This section describes the TL1 commands you use to perform the following routine
operations with the TimeProvider:
Displaying events
Displaying the current configuration
Restarting the TimeProvider
Displaying Events
The RTRV-LOG command displays all the events in the event log in chronological
order (first in - first out). The event log contains the 500 most recent alarmed and
non-alarmed events. Alarms with an alarm level of NONE are not stored in the log.
RTRV-LOG:[<tid>]:[<aid>]:[<ctag>][::<keyword>=<value>];
This command has a default access level of USER.
<aid>
ALL (or null)
IMC
IOC
IOCm (m = 1 | 2)
GPS
PRS
INPp (p = 1 | 2)
OUTg (g = A | B |
C | D)
Sample Command
RTRV-LOG::INP1:TS1000::ALM;
This command causes the TimeProvider to return all alarms stored in the log for
Input 1.
128 TimeProvider User's Guide
<keyword>
Access identifiers
All (or null)
Displays both events and
alarms stored in the log for the
specified aid
EVT
Displays events stored in the
log for the specified event
ALM
Displays alarms stored in the
log for the specified event
Description
097-58001-02 Revision C – August 2005