Rear Access; Input Modules; Output Modules; Bnc Input Module - Symmetricom TimeProvider 1000 User Manual

Rear Access

The rear-access Expansion Panel (part number 990-58102-01) provides an
additional 32 outputs, for a system total of 64 outputs. The NEBS-style Expansion
Panel supports up to four additional Output Modules with various connector types;
each Output Module provides up to eight output signals. See
numbers for Output modules.

Input Modules

Six Input modules are available to match the wiring scheme and termination
impedance requirements at the installation site. Select one of these Input modules
for use with your TimeProvider system.
for the TimeProvider.
Table 2-1. Input Modules Available for the TimeProvider
Part Number
090-58061-01
090-58061-02
090-58061-03
090-58061-04
090-58061-05
090-58061-06

Output Modules

Symmetricom has seven Output modules available for the TimeProvider that allow
you to select the proper termination for your application. You can install any
combination of up to four Output modules in the main shelf or in the available
Expansion Panel.
Table 2-2. Output Modules Available for the TimeProvider
Part Number
090-58091-01
090-58091-02
090-58091-03
097-58001-02 Revision C – August 2005
Description

BNC Input module

Wire-wrap Input module
DB9 Input module
SMZ/BT43 Input module
Metric (Siemens) 1.0/2.3 Input module
Metric (Siemens) 1.6/5.6 Input module
Table 2-2 lists the Output modules available for the TimeProvider.
Description
BNC Output module
Wire-wrap Output module
DB9 Output module
Chapter 2 Engineering and Ordering Procedures
Table 2-1 lists the Input modules available
TimeProvider User's Guide
Input Modules
Table 2-2 for part
43