Setting The Date And Time - Symmetricom TimeProvider 1000 User Manual

<keyword>
SIDCHG
Sample Command
SET-SID:::TS1000::SIDCHG=TP-SSU;
This sample command sets the <sid> to TP-SSU. All response messages are
identified by this name. Symmetricom recommends that you use unique names for
each TimeProvider in the network. Record the name you chose for the
TimeProvider in
If you include the _ character in the <value>, then the TimeProvider returns the SID
in quote marks.
Autonomous Message
A 1167 REPT EVT
SOURCE ID HAS CHANGED,TP-SSU\""
;

Setting the Date and Time

Use the following TL1 command to set the date and time in the IMC.
ED-DAT:[<tid>]:[<aid>]:[<ctag>]::<keyword>=<value>;
This command has a default access level of ADMIN.
<aid> <keyword>
SYS DATCHG
<yy-mm-dd>
TIMCHG
(hh-mm-ss)
LOCTIM
±
( hh-mm)
Sample Command
ED-DAT::SYS:TS1000::DATCHG=03-10-24;
097-58001-02 Revision C – August 2005
<value>
Up to 20 alphanumeric
characters. Do not use
the " character.
Table 4-3.
TP-SSU 03-05-15,10:02:03
"IMC,EQPT:NA,SIDCHG,NSA,03-05-15,10-02-03:\"SYSTEM'S
<value>
yy = <year>
mm = 01 to 12
dd = 01 to 31
hh = 00 to 23
mm = 00 to 59
ss = 00 to 59
±
hh = 00 to 12
mm = 00 to 59
Chapter 4 Provisioning the TimeProvider
Starting the TimeProvider for the First Time
Description
Sets the Source
Identifier
Description
2-digit year
Month
Day
Hour of Day
Minutes
Seconds
Time in hours and minutes that local time is
offset from UTC.
TimeProvider User's Guide
Default value
N/A
85