Set And Clear Conditions For Alarms - Symmetricom TimeProvider 1000 User Manual

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
Table 6-5. Event Codes (Continued)
Event ID
Description
RTMSTATE The specified
Retimer port state
has changed.
SLIPCHG The Retimer slip
threshold has
changed.
SLIPCLR The Retimer slip
counter has been
cleared
Table 6-6 describes the alarm codes and their set and clear conditions.
Table 6-6. Set and Clear Conditions for Alarms
Alarm ID Set Alarm Conditional Description
COMPAT System components are incompatible
EXPFAIL Expansion connectivity failed
PWRA Power A Failed
PWRB Power B Failed
EXTALM1 External Alarm 1 set
EXTALM2 External Alarm 2 set
IOC1EQPT IOC1 removed from the shelf
IOC2EQPT IOC2 removed from the shelf
IOC1COMM IMC to IOC1 communication failed
IOC2COMM IMC to IOC2 communication failed
IMCFAIL Summary alarm of BIST faults
IOC1COMM IOC1 to IMC communication failed
164 TimeProvider User's Guide
Keyword AID
TYPE
T1
T1
T1
SYS Codes
IMC Codes
IOC1 Codes
Default Value/
Description of Values
Keyword
ENABLE ENABLE – Enables the
Retimer port
DISABLE – Disables the
Retimer port and clears all
active alarms associated
with the port.
4 0 to 255
NA NA
Clear Alarm Conditional Description
System components are compatible
Expansion connectivity restored
Power A Restored
Power B Restored
External Alarm 1 cleared
External Alarm 2 cleared
IOC1 reinstalled
IOC2 reinstalled
IMC to IOC1 communication established
IMC to IOC2 communication established
IOC1 to IMC communication established
097-58001-02 Revision C – August 2005