Edit Date (Ed-Dat); Ed-Dat - Keywords And Values For <Aid>=Sys - Symmetricom TimeProvider 1100 Reference Manual

Chapter 2 TL1 Command Syntax and Description

Edit Date (ED-DAT)

Edit Date (ED-DAT)
This command changes the system date and time. If the date and time is set by
GPS, the date and time cannot be changed. The local time offset can always be
changed even after the time is changed by GPS.
This command has a default access level of ADMIN.
Syntax
ED-DAT:[<tid>]:[<aid>]:[<ctag>]::<keyword>=<value>;
Parameter
<aid>
Table 2-4. ED-DAT – Keywords and Values for <aid>=SYS
<keyword> <value>
DATCHG yy-mm-dd The year, month, and day set for the system:
TIMCHG hh-mm-ss The hours, minutes, and seconds set for the system:
±
LOCTIM
hh-mm
Example
To change the system time to 1:56:00 PM:
Input
ED-DAT::SYS:TP1000::TIMCHG=13-35-56;
Normal Response
TP-SSU
M TP1000 COMPLD
;
Autonomous Message
TP-SSU 05-02-10 13:35:56
A 2535 REPT EVT
"SYS,EQPT:TIMCHG,TC,05-02-10,13-35-56,,,,:\"SYSTEM TIME HAS CHANGED,
13-35-56\""
;
44 TimeProvider TL1 Reference Guide
Value
SYS The command's effect is at the system level.
Note: See
yy = the 2-digit year, mm = the 2-digit representation of
the month, dd = the day of the month
hh = hour, in 24-hour format, mm = minutes, ss = seconds
The hours and minutes that local time is offset from UTC:
hh = the local time's hour offset from UTC;
mm = the local time's minute offset from UTC
05-02-10 13:35:56
Description
Table 2-4 for <keyword> and <value> descriptions.
Description
097-58001-01 Revision E – September 2006
Default
N/A
N/A
N/A
±
12 hours,