3.8 Main Circuit Wiring
◆ Protecting Main Circuit Terminals
■
Insulation Caps or Sleeves
Use insulation caps or sleeves when wiring the drive with crimp terminals. Take particular care to ensure that the wiring
does not touch nearby terminals or the surrounding case.
Insulation Barrier
■
Insulation barriers are packaged with drive models CIMR-U40477 through 40930 to provide added protection
between terminals. Yaskawa recommends using the insulation barriers provided to ensure proper wiring. See
for instructions on where the insulation barriers should be placed.
Figure 3.30
Insulation Barrier
Main Circuit Protective Cover
■
Close the protective cover after wiring the main circuit terminals on 20028 to 20081, 40011 to 40077.
Figure 3.31
Figure 3.30 Main Circuit Protective Cover (20028 to 20081, 40011 to 40077)
90
Figure 3.29 Installing insulation barriers
YASKAWA ELECTRIC SIEP C710636 02B YASKAWA U1000 Technical Manual
Figure 3.29