YASKAWA U1000 Series Technical Manual page 336

5.10 o: Operator Related Settings
o4-07: DC Bus Pre-Charge Relay Maintenance Setting
■
Sets the value of the softcharge bypass relay maintenance time displayed in U4-06 as a percentage of the total expected
performance life. This value should be reset to 0 when the bypass relay has been replaced.
Note: The actual maintenance time will depend on the environment where the drive is used.
No.
o4-07
o4-11: U2, U3 Initialization
■
Resets the fault trace and fault history monitors (U2- and U3-).
No.
o4-11
Setting 0: No action
The drive keeps the record already saved concerning fault trace and fault history.
Setting 1: Reset fault data
Resets the data for the U2- and U3- monitors. Setting o4-11 to 1 and pressing the ENTER key erases fault data
and returns the display to 0.
o4-12: kWh Monitor Initialization
■
Resets the electric power (U9-01 to U9-03) and regenerative power (U9-04 to U9-06). Resets electric power rate (U9-07
to U9-10) and regenerative power rate (U9-11 to U9-14).
No.
o4-12
Setting 0: No Action
Setting 1: Reset kWh Data
Once o4-12 is set to 1 and the ENTER key is pressed, kWh data is erased and the display returns to 0.
o4-13: Number of Run Commands Counter Initialization
■
Resets the Run command counter displayed in U4-02.
No.
o4-13
Setting 0: No Action
The Run command data are kept as they are.
Setting 1: Number of Run Commands Counter
Resets the Run command counter. The monitor U4-02 will show 0. Once o4-13 is set to 1 and the ENTER key is pressed,
the counter value is erased and the display returns to 0.
o4-19: Power Unit Price
■
Sets the energy price per 1 kWh. This parameter is used to calculate the power rate displayed for total consumed power
(U9-07 to U9-10) and total regenerated power (U9-11 to U9-14).
No.
o4-19
336
Name
DC Bus Pre-Charge Relay Maintenance Setting
Name
U2, U3 Initialization
Name
kWh Monitor Initialization
Name
Number of Run Commands Counter Initialization
Name
Power Unit Price
Setting Range
Setting Range
Setting Range
Setting Range
Setting Range
0.00 to 650.00
YASKAWA ELECTRIC SIEP C710636 02B YASKAWA U1000 Technical Manual
Default
0 to 150%
Default
0 or 1
Default
0 or 1
Default
0 or 1
Default
000.00
0%
0
0
0