YASKAWA U1000 Series Technical Manual page 537

Low harmonics regenerative matrix converter

Hide thumbs Also See for U1000 Series:

Table of Contents

200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0

<14> Default setting value is dependent on the motor code set to parameter E5-01.

<18> Values shown here are for 200 V class drives. Double the value when using a 400 V class drive.

<42> Default settings for E1-04 through E1-10 (E3-04 through E3-10 for motor 2).

<44> The default value shown here is for the following localized drives: Japan (Model code: CIMR-UA), India (Model code: CIMR-UD), Asia

(Model code: CIMR-UT). For default value of China localized drive (Model code: CIMR-UB), refer to

Localized Drive: CIMR-UB

Table B.8 Default Values of the China Localized Drive: CIMR-UB

Maximum Output Frequency

Middle Output Frequency

Minimum Output Frequency

Motor 2 Max Output Frequency

Motor 2 Base Frequency

Motor 2 Mid Output Frequency

Motor 2 Minimum Output Frequency

<14> Default setting value is dependent on the motor code set to parameter E5-01.

YASKAWA ELECTRIC SIEP C710636 02B YASKAWA U1000 Technical Manual

Table B.7 E1-03 V/f Pattern Settings for Drive Capacity:

CIMR-U20248; CIMR-U40156 to 40930

V/f, V/f w/PG

Base Frequency

Control Mode (A1-02, E3-01)

B.5 V/f Pattern Default Values

Default Values of the China

Chapters

Table of Contents