Remote Operation - YASKAWA U1000 Series Technical Manual

◆ Digital Operator Remote Usage

Remote Operation

■
The digital operator mounted on the drive can be removed and connected to the drive using a remote control extension
cable up to 3 m long. This makes it easier to operate the drive when it is installed in a location where it can not be
accessed easily.
The digital operator can also be permanently mounted in a remote location like a panel door. A remote control extension
cable and an installation support set (depending on the installation type) will be required.
Note: Refer to Drive Options and Peripheral Devices on page 433
support sets.
Figure 2.11
Digital Operator Remote Installation
■
Digital Operator Dimensions
YASKAWA ELECTRIC SIEP C710636 02B YASKAWA U1000 Technical Manual
Drive
Comm Port
Figure 2.11 Communication Cable Connection
12.2 1.6
7.9
60
minimum
50
Figure 2.12 Digital Operator Dimensions
for information on remote control extension cables and installation
Operator
S / N : J007XE273710001
Communication Cable Connector
Installation holes (2-M3 screws, depth 5)
S / N : J007XE273710001
44
2.2 Mechanical Installation
Unit: mm
2
55