YASKAWA U1000 Series Technical Manual page 180

Low harmonics regenerative matrix converter

Hide thumbs Also See for U1000 Series:

Table of Contents

5.1 A: Initialization

to scroll to A1-04.

to save the new password.

Drive returns to the parameter display.

and scroll to A1-02.

to display the value set to A1-02.

to change the value if desired (though changing the control mode at this point is not typically done).

to save the setting, or press

The display automatically returns to the parameter display.

Note: Parameter settings can be edited after entering the correct password. Performing a 2-wire or 3-wire initialization resets the

password to "0000". Reenter the password to parameter A1-05 after drive initialization.

A1-06: Application Preset

Several Application Presets are available to facilitate drive setup for commonly used applications. Selecting one of these

Application Presets automatically programs certain parameters to a new set default values and selects the functions for

the I/O terminals that best suit the application. All parameters changed when selecting an Application Preset are also

assigned to the list of User Parameters, A2-01 through A2-16. These can be edited more easily in the Setup Mode and

provide quicker access by eliminating the need to scroll through multiple menus.

Refer to Application Selection on page 148

to enter the password.

to return to the previous display without saving changes.

for details on parameter A1-06.

YASKAWA ELECTRIC SIEP C710636 02B YASKAWA U1000 Technical Manual

Display/Result

Enter Password

Enter Password

Entry Accepted

Enter Password

Control Method

Open Loop Vector

Control Method

Open Loop Vector

Control Method

Entry Accepted

Control Method

Chapters

Table of Contents