Strand Lighting NEO User Manual page 45

Create a palette chase from selected fixtures - creates as simple step based chase with the selected fixtures where
the contents of each step is selected from a list of palettes.
Use the left and right arrows to move palettes in and out of the available palette list.
Create a standalone FX from running library fx - this takes a running library effect and creates a show specific
effect based upon that running library effect. This is a great practice in order to keep the library as a stock resource
point by not recording over it.
Enter appropriate info in the presented dialogue box.
+
Record Palette - activates the Record Palette dialogue box in order to facilitate creating a Generic Palette.
To add selected channels to a palette:
Step 1. Set up the fixtures into the static state (dimmer, color, pan
and tilt etc)
Step 2. Click on the "Record Palette" at the top of the window or
press and hold [RECORD] while pressing [GENERIC
PALETTE] button.
Step 3. Enter the palette name and shortcut number you would like
to assign to the current state. You can also select what
attributes you want to include in the palette using the check
boxes provided.
NEO NOTES & TIPS: This operation only allows you to create new entries and cannot be used to add to an
existing palette.
Step 4. Enter the shortcut number you would like to assign and click the "OK" button to confirm the requested
action. If you have changed your mind, click "Cancel" to return to the channel window.
NEO Lighting Control Console
Command Pulldowns
43