Strand Lighting NEO User Manual page 241

NEO Lighting Control Console
GROUP {number, name} {SELected} RECord
To record a new channel group use the "Record" keyword at the beginning or end of the command. By default the
active channels will be recorded but by adding the "Selected" keyword the currently selected channel will be
recorded.
NEO NOTES & TIPS: Grp "Back lights" sel rec - The command will create a new group or add to the existing
group called "Back Lights" and add the currently selected channels.
GROUP {number, name} {SELected} UPDate
To update a channel group use the "Update" keyword at the end of the command. Only the channels that are currently
in the group will get updated.
NEO NOTES & TIPS: Grp "Back lights" Upd - The above command will update the existing group called "Back
Lights" with the current channel state.
FX
The effect (Fx) command is used to record chase steps into a simple chase. This command can only be used to add
steps to the chase and cannot be used to modify an existing step. For more advanced chase editing it is recommended
that the "Fx Editor" is used.
FX {number, name} {SELected} REC
NEO NOTES & TIPS: Fx "chase 1" rec - The command will record the current channel state into the next step of
the simple chase called "chase 1".
SUBMASTER {SUB}
The submaster command can be abbreviated to "Sub" to save typing. This command has several function depending
on the text entered after the "Submaster" keyword.
SUB {number list} @ {value}
The above command can be used to set a submaster or list of submasters to specific value. Any number of submasters
can be applied and the same syntax as selecting channels is used as the number list.
NEO NOTES & TIPS: Sub 1/4 @ 23 - The command will set submasters 1 through to 4 at 23%.
SUB {number} {SELected} REC
The above command will create a new channel group and automatically assign the submaster identified by the
{number} to it. The "Selected" keyword can be used to record only the selected channels.
NEO NOTES & TIPS: Sub 4 rec - The command will create a new channel group and add the currently active
channels to it. It will also assign submaster 4 to the new channel group.
SUB -/+ or SUB PAGE {number}
Use the above commands to set the current submaster page. Enter a + or a - after the submaster keyword will increase
or decrease the current page. Entering a number after the keyword will jump to the specified page.
SHORTCUT {SC}
The shortcut command can be abbreviated to "SC" to save typing. Use the shortcut command to execute the desired
shortcut.
IF
The "IF" command is as advanced selection tool to select channel or fixtures that match a series of conditions. This
command can be used to select fixtures by searching a mix of different parts of your show. Any combination of
conditions can be specified with standard AND(&), OR(|) and NOT(!) combinations.
239
Command Window Interface