Table of Contents
Advertisement
User's Manual
Cleanup "Next Cue" Numbering from this Point
If you have got the "next cue" column out of sequence you can easily return it to the default sate (next cue always
follows the cue number) by selecting this option. The cleanup will happen from the currently selected cue down. To
clean up the entire cue list select the first cue before selecting this option.
Re-Number as Whole Cues from this Point
If have a lot of point cues in the cue list from inserting cues or rearranging the order of the cue you can use this option
to quick re-number. After this operation every cue will be a whole number with no decimal part to it.
The re-number will happen from the currently selected cue down. To re-number the entire cue list select the first cue
before selecting this option.
Timestamp Next Non-Zero Cue
When working with timecodes it is often useful or convenient to create your cue list without any timecode values
loaded. Once you have created the cue list you must then go back and assign timecode values manually.
To aid with this operation NEO provides the ability to timestamp cues with the last read timecode. Once you have
created the cue list you can then play back the timecode track and stamp each cue in real time. Because using the right
click menu is not a quick enough operation when playing back media in real time a shortcut (control - t) is also
provided. Playback the timecode track and press the control-t to stamp the next non zero cue at the appropriate times.
Clear Notes for the Selected Cue
Use this option to empty the cue notes field for the selected cues.
Reset All Effects in the Selected Cue
The reset effects option is used during playback of the cue list. If the cue contains effects you can manually stop the
effect execution without stopping the cue using this option.
Force Resave of this Cue List
Use this option to force a resave of this cue list.
Visualizer Preview Options
This sub menu can be used to view the state of a cue in the attached visualizer without having to run it live.
Preview this cue in visualizer - Select this option and the currently selected cue will be shown in the visualizer
output. The live output will be blocked until you release it.
Release visualizer preview - Use this release option to return control of the visualizer back to the live output.
Always preview the next cue in the visualizer - This options can be toggled on or off. If this option is on and a cue
is run the next cue will be shown in the visualizer and the live output will be blocked until this option is turned off or
the release option is selected.
Run Cue
To the right of the cue options menu is the run cue button. The function of
this button will change depending on the setting. Options are...
Run Cue - triggers cue to run in recorded time.
Goto Cue - triggers cue using the default Goto time. Goto time is set in
System Properties>Show Defaults.
This button performs the same operation as double clicking on the "status" field of the cue list. It also provides an
easy indication of what double clicking on a cue will do.
Add Cue
Adds a cue at the end of the cue list.
Delete Cue
Deletes the currently selected cue. There is an option here to delete the cue Cue Only. Otherwise, the cue will be
deleted Tracking.
9 8
Software Configuration
Advertisement
Table of Contents
Need help?
Do you have a question about the NEO and is the answer not in the manual?