Strand Lighting NEO User Manual page 240

User's Manual
NEO NOTES & TIPS: Save "c:\demo\my show.fdb" - The command will save the current show under the name
"my show.fdb" in the "c:\demo" directory.
NEO NOTES & TIPS: Load "c:\demo\my show.fdb" - The command will load the show "my show.fdb" in the
"c:\demo" directory and make it the current show.
For more information on loading and saving show, refer to "Options" on page 67.
UNDO
The undo is used to revert back to the previous state prior to a command being entered.
RECORD {REC}
The record command can be abbreviated to "Rec" to save typing. Entering the record command followed by enter
will popup the "Record Cue" dialog that is used in the channel display when pressing the "Record Cue" button.
REC {CUE, FX, GROUP, SUB} {additional information}
If the record command is followed by the keywords CUE, FX, GROUP, SUB then the syntax is the same as if the
"REC" is placed at the end of the command line. For more information see the CUE, FX, GROUP and SUB sections
below. Entering the record command at the start of the command line is useful if you do not want the command to
execute automatically. Entering REC at the end of the command line text will cause the command to execute
automatically.
RECN {desc} {fade in} {fade out} {follow} {delay} {dwell}
Short for "Record Now" the "RECN" command will execute a silent cue record without any further interaction. All of
the fields are optional and you can add as many or as few of the option as you need.
• Desc - Cue Description
• Fade in - Fade in/up time in seconds
• Fade out - Fade out/down time in seconds
• Follow - Follow time in seconds
• Delay - Cue delay time in seconds
• Dwell - Cue dwell time in seconds.
NEO NOTES & TIPS: Recn "Sunrise to sunset" 20.6 5 - The command will record the current channel state to a
new cue at the end of the active cue list. The cue description will be set to "Sunrise to sunset" and the fade in time is
20.6 seconds and the fade out time is 5 seconds.
UPDATE {UPD}
The update command can be abbreviated to "UPD" to save typing.
Use the update command to update an existing cue to modify or replace the cue. Entering the "Update" command on
its own will immediately update the current live cue with the current channel state.
GROUP {GRP}
The group command can be abbreviated to "Grp" to save typing. This command has several functions and can be
used to set a channel group to a specific level or to record and update a group.
GROUP {number list} @ {value}
The above syntax can be used to set a channel group to a specific value. Any number of groups can be applied and the
same syntax as selecting channels is used as the number list.
NEO NOTES & TIPS: Grp 1,3,8 @ 50 - The command will set the channel groups 1, 3 and 8 at 50%.
2 3 8
Reference / Window Overview