Recording Palettes Into Cues - Strand Lighting NEO User Manual

Recording Palettes into Cues

NEO is able to automatically use the palettes (generic palettes) or channel groups (specific palettes) you have created
when a cue is recorded.
Before recording the cue apply the pallets you want to use as described in "Using the color palettes" and "Using the
position presets". In the verbose view you will see the name of the palette that is currently active on the attribute.
Record the cue as you would normally and enable the option "Record palettes into this cue".
Include Palettes and
Focus Groups
After recording the cue open the cue list editor and double click on the channel field to access the "Cue List Details"
window.
In the cue list detail window recorded palettes show up as red text. In Figure 184 we can see that the "color 1"
attribute and the "Pan & Tilt" attribute are now referencing palettes. Some of the "P/T Speed" attributes are
referencing palettes and some have hard values of 0%.
Clicking on the DMX tab of this window will display the values that are referenced by this palette. Remember that
the value is not actually stored with the cue but rather referenced. If a change is made to the channel group "Pos DSC"
then all of the cues that use this channel group (as a palette) will automatically reference the changed value.
NEO Lighting Control Console
Palettes & Groups
139