Table of Contents
Advertisement
NEO Lighting Control Console
Log Incoming Telnet Data
Show "first time software is run" Dialog
When on, the following screen appears to help the user chose which tracking mode to use.
Remember Cue Update History
The cue update history is a powerful system to enable you to retrieve a cue state from any previous record operation.
At any time you can revert to a previous cue state. To do this the software will store the cue state into an update
history table. This feature can cause the show file to grow in size much faster than normal. If you do not want to keep
this historical information (to save space) turn this option off.
Don't Prompt to Close the Software
If you are using the NEO console in an automated shutdown environment turn this option on to prevent the software
from prompting the user to confirm closing.
Don't Show Startup Failure Warning
If NEO does not start correctly it will prompt if you want to open a default show the next time you start. To disable
this prompt turn this option on.
Don't Apply Submasters for Merged Channels
By default DMX input will always be routed to the submaster system. Use this option to disable DMX input going to
submasters when using the DMX merge feature.
Check for Software Updates
Default on - With this option on NEO will attempt to connect online and check if a new version is available. When a
new version is released a popup will notify you soon after startup.
Disable Undo in the Cue List Window
If you are using a very high channel count then the undo system can result in sluggish performance. If you find that
modifying a cue is taking a long time then disable the undo using this option.
Reset Chase When Submaster Reaches Zero
By default a chase will be paused when an assigned submaster reaches zero (0). Turn this option on to perform a
Reset rather than a pause.
Shutdown System on Exit
Default on for consoles, it is recommended to turn this off for laptop or PC use.
177
Advanced System Settings
Advertisement
Table of Contents
Need help?
Do you have a question about the NEO and is the answer not in the manual?