Select Active Options; Command Pulldown - Level - Strand Lighting NEO User Manual

NEO Lighting Control Console

Select Active Options

Select all fixtures - selects all patched fixtures.
Select inactive (off) fixtures - selects all non-active fixtures. (with a level of
0).
Select changed fixtures - selects all fixtures that have had a value changed
(in red).
Invert current selection - will deselect all selected fixtures and select all
deselected fixtures.
Select Previous - select the previously selected set of fixtures.
Show only selected fixtures (View) - changes the current view to only
display selected fixtures. [UNDO] [ENTER] restores to the previous view.
Select odd fixtures of currently selected - takes current selection set and
filters to only the odd fixtures.
Select even fixtures of currently selected - takes current selection set and filters to only the even fixtures.
Interleave selection - from existing selection set, allows user to select every "number" and
choose the size of the cluster.
Inclusive Selection Mode - when mode is selected (button text is red) all selected fixtures
will add to currently selected fixtures. The Inclusive Mode button is a toggle. When off
(button text is white), all selected fixtures will replace any currently selected fixtures.
Active Select Mode - when mode is selected (button text is red) sets selected fixture value
to Full and allows [NEXT] / [LAST] buttons to advance while maintaining selected fixture at full level. This is the
best way to do a rig check or find a lamp. When off (button text is white, selected fixture's intensity goes back to
normal.
"Hi Light" Selection Mode - when mode is selected (button text is red) sets selected fixture to its "hi light" mode.
The specifics of the hi light mode is determined by the settings in the fixture within the fixture library editor.
The goal of Hi Light is to find a fixture in a complex cue where visual clarity is compromised by a large quantity of
fixtures being on onstage.

Command Pulldown - Level

On - applies the ON value to the selected fixtures.
Out - applies the Out value to the selected fixtures. It turns those fixtures off.
Home - applies the Home values (default values) to the selected fixtures.
Fan - opens the Fan dialogue box to apply a "fan" any attribute on the selected fixtures.
Fan
The "fan" function is a powerful way to create organized looks on stage without having to modify a number of
fixtures one at a time. There are a number of different looks that can be created depending on the attribute you want to
control.
33
Command Pulldowns