Other Commands - Strand Lighting NEO User Manual

User's Manual
NEO NOTES & TIPS: 24/30 zoom @ 23 fade 2.4 - This will set the zoom property of fixtures 24 through to 30 to 23
degrees and will take 2.4 seconds to reach this value from the current zoom attribute value.
NEO NOTES & TIPS: When working with intelligent fixtures such as the one in this example, the term "fixture"
replaces the term "channel" in NEO.
ON, OFF, SOLO, FULL, @@
The On, Off, Solo and Full commands can be used to replace the channel value.
Setting channels to "Off" will set the dimmer or attribute value to 0.
Setting the channels to "On" will set the dimmer or attribute to the on level specified in the system properties.
Setting the channel to "Solo" will turn off all other channel while turning on the selected channels.
Setting the channel to "Full" will set the dimmer or attribute to 100%
@@ is a special command that can be used to quickly set the channels to the "On" level.
When using the On, Off, Solo and Full keywords you do not need to enter the "@" symbol prior to the command.
NEO NOTES & TIPS: 3+6/9 On - This will set channels 3 and 6 through to 9 to the on level.
PALETTE
The palette command is used to reference the value stored in a palette. The value entered after the "Palette" keyword
is the palette number to apply. The palette numbers are displayed in the "Palette" window.
NEO NOTES & TIPS: 6/9 color @ palette 2 - This will set the color of channels 6 through to 9 to the color defined
in palette 2.

Other Commands

CLEAR (CLR)
Use the clear function to unselect channels and clear the channel display. Entering the clear command on its own will
clear the command history display. Use the "CLEAR ALL" syntax to clear all channels in the system.
Optionally you can put a channel list after the clear command to clear only the listed channels.
NEO NOTES & TIPS: clr 1/20 - The command will unselect the channel 1 through to 20.
NEO NOTES & TIPS: clear all - Use the "All" keyword to unselect all of the channels in the system.
BO (BLACKOUT)
Use the blackout command to release channels. Entering the blackout command twice on its own will release all
channels.
NEO NOTES & TIPS: BO BO - This will turn off all channels in the system resulting in a total blackout.
Optionally you can put a channel list after the blackout command to release only the listed channels.
NEO NOTES & TIPS: BO 1/20 - The command will turn off (blackout) the channel 1 through to 20.
2 3 6
Reference / Window Overview