Pitney Bowes DM475 Operator's Manual page 92

7 • System Options
Basic Options
Setting the Time, Date, and Timeouts (cont'd)
Setting Auto Date Advance Time
Your system can automatically advance the date every day at a time
you specify. The date advance time is factory set to 12:00 AM. If your
mail is picked up at a certain time each day, you can set the system
to advance the date after the mail pickup time.
1. Press Menu.
2. Select "Setup".
3. Select "Time and Timeouts".
4. Select "Auto Date Advance Time".
Time to Auto Date
(Next Day) Advance
◄ Switch AM/PM
◄ Accept
5. Select "Switch AM/PM" to toggle between "AM" and "PM".
6. If necessary, press the Clear key to remove the existing time
entry.
7. Type in the time. Example: To enter one o'clock, type 1 - 0 - 0. To
enter 12:01 o'clock, type 1 - 2 - 0 - 1. (Don't type the hyphens.)
8. Select "Accept". The display returns to Time & Timeouts menu.
i
NOTE:
Accounting data is posted on the actual date the mail
piece is run (per the internal clock/calendar in the mailing sys-
tem), not by the date printed on the meter stamp.
7-4
Enter Time
12 : 00 AM
SV62415 Rev. B