Pitney Bowes DM100 Resetting Normal Presets

Postage meters

Hide thumbs Also See for DM100:

Occasionally the software for a rate change may disrupt your normal

preset rates. You can reset these preset rates by finding your machine

type and following the instructions below.

(Note: This guide shows you how to set your Normal Preset to a "First Class Letter"

rate. If you're setting it to a different rate simply set your rate and skip to step 2.)

DM100/125/200/225

Resetting

Normal Presets

For Pitney Bowes

Postage Meters

1) Set Machine Rate to First Class Letter

a. Press "Class" Key to the left of screen

b. Select "US Domestic"

c. Select "1st Class"

d. Select "Letter"

e. Select "Done"

2) Set the Rate to Normal Preset

a. Press "Custom Presets" Button

b. Select "Define Normal Preset"

c. Select "Yes"

Table of Contents

Do you have a question about the DM100 and is the answer not in the manual?

Page 1 Resetting Normal Presets For Pitney Bowes Postage Meters Occasionally the software for a rate change may disrupt your normal preset rates. You can reset these preset rates by finding your machine type and following the instructions below. (Note: This guide shows you how to set your Normal Preset to a “First Class Letter”...
Page 2 DM300/400/475 1) Set Machine Rate to First Class Letter a. Press “Class” Key to the left of screen b. Select “US Domestic” c. Select “1st Class” d. Select “Letter” e. Press “Enter” Key 2) Set the Rate to Normal Preset a.

Dm125 Dm200 Dm225 Dm300 Dm400 Dm475 ... Show all