Cleaning The Feeder Exit Sensor - Pitney Bowes DM475 Operator's Manual

Cleaning the Feeder Exit Sensor

The feeder exit sensor will require cleaning periodically. Lift the cover
on the feeder/WOW and locate the sensor (see figures below). Use a
cotton-tipped swab to clean both the top and bottom surfaces/holes.
Cleaning the under side of the top
section of feeder exit sensor
SV62415 Rev. B
11 • Maintenance
Cleaning the bottom section of
feeder exit sensor (the swab must
go inside the hole for proper
cleaning)
11-15