Cleaning The Shield And Wick - Pitney Bowes DM475 Operator's Manual

Maintaining the Moistener

Cleaning the Shield and Wick

i
NOTE:
This procedure assumes you have already removed the
stripper blade/brush assembly (see previous pages).
1. Open the feeder/WOW cover, remove the moistener bottle, and
place it on the table top with its cap facing up.
2. Pull the moistener tank (located under moistener bottle) straight
out towards you. Gently lift the tank up and out.
IMPORTANT:
The moistener tank may be full of E-Z Seal
If so, you can pour the solution back into the moistener bottle
or into a receptacle.
SV62415 Rev. B
11 • Maintenance
sealing solution.
®
11-13