11 • Maintenance
Filling the Moistener
1. Check the indicator in the top cover.
2. Open the feeder/WOW cover.
3. Remove the moistener bottle, and place it on the table top with
its cap facing up.
3. Unscrew the moistener bottle cap and fill the moist-
ener bottle with Pitney Bowes E-Z Seal
tion. We recommend E-Z Seal
your moistener clean and improves sealing efficiency.
IMPORTANT:
Do not overfill the moistener bottle.
4. Screw back on the moistener bottle cap and place the bottle
back in its original location (upside down in machine).
5. Close the appropriate cover.
11-10
Check Level
Here
sealing solu-
®
because it helps keep
®
Feeder/
WOW Cover
SV62415 Rev. B