Pitney Bowes DM475 Operator's Manual page 152

11 • Maintenance
Maintaining the Moistener
Cleaning the Stripper Blade/Brush Assembly (cont'd)
3. Push down on the blue button and slide the blade/brush assem-
bly out of the deck.
Blue
Button
4. Clean the moistener brush by running the it under plain water.
Blot the excess water from the brush after rinsing it.
i
NOTE:
5. If you need to clean the wick and shield, continue with Cleaning
the Shield and Wick on the next page.
6. Slide the assembly back onto the machine. You should hear a
click as it engages.
7. Lower the moistener clearance lever and close feeder/WOW
cover.
11-12
Replace the assembly if it cannot be cleaned thoroughly.
Stripper Blade and Brush
Blade/Brush
Assembly
SV62415 Rev. B