Printing A Single Tape; Printing Multiple Tapes - Pitney Bowes DM475 Operator's Manual

Processing Parcels
If your mail piece is too thick to pass through the feeder (non-Letter
size), you can use a tape strip to print the indicia on, then apply it to
your mail piece.
Printing a Single Tape Strip
1. Push the tape lever to the right and drop tapes down into the slot.
i
NOTE:
towards the control panel display (to the right).
2. Press Tape when ready to print. By default, a single tape is printed.
Printing Multiple Tape Strips
i
NOTE: Ensure the system is configured to print multiple tapes.
Refer to Chapter 7, System Options, "Configuring the Tape
Button" for more information.
• If the system is ready to print postage and the Home screen is
displaying, simply type in number of tapes you wish to print and
press Tape OR
• Press Tape. You will be prompted to enter the tape quantity.
Press Start to begin printing tapes.
Please refer to Chapter 4, Printing Options for available print options.
SV62415 Rev. B
The printable side of the tape should be facing
3 • Running Mail
3-15