1 • Introduction
Important Safety Notes
•
Keep fingers, long hair, jewelry and loose clothing away from
moving parts at all times.
•
Avoid touching moving parts or materials while the machine is in
use. Before clearing a stall (jam), be sure machine mechanisms
come to a complete stop.
•
To prevent overheating, do not cover the machine.
•
When removing stalled material, avoid using too much force
to protect against minor personal injury and damage to the
equipment.
•
Use the equipment only for its intended purpose.
•
Always follow the specific occupational safety and health
standards prescribed for your workplace.
CAUTION: In case of an ink spill, leaking ink or
excessive ink accumulation, immediately disconnect
the power cord from the wall plug and contact Pitney
Bowes. See page v for contact information.
CAUTION: Do not move the DM475 by yourself. The
machine is made to separate into two sections, and by
moving it without proper disassembly, you may:
Contact Pitney Bowes to arrange a Service visit for
moving the machine (additional charges may apply).
See page v for contact information.
1-8
• cause serious injury to yourself
• cause serious damage to the machine
• cause the WOW module to go off of calibration
• void any service warranties
SV62415 Rev. B