To Mount The Logic Analyzer - HP 1670A Series User Manual

Connecting and Configuring
To mountthe logic analyzer
To mount the logic analyzer
Before Mounting
You need to wait at least 15 seconds after the Analyzer Configuration menu is
displayed before attempting to mount If you try to mount too soon, you will
receive an error message.
You can mount the logic analyzer on your network for two different levels of
use, control or data. The logic analyzer accommodates one control user and
multiple data users. Control allows users to read and write files to and from
the analyzer, while data allows users to only read files from the file system.
Data users can also write files to the disk drives of the logic analyzer.
If
you have trouble, refer to chapter 7, "Troubleshooting."
For the exact syntax of the mount command for mount, refer to your network
documentation.
Mounting and Unmounting
You must unmount the logic analyzer before turning it off. After unmounting,
you can mount the analyzer 15 seconds after the Analyzer Configuration menu
is displayed when powering up the instrument. You can write a network script
that executes an unmount and mount procedure.
1-8