Using Instrument Functions
The analyzer provides a CRT adjustment feature which can be used to get
an external monitor to synchronize properly, and to optimize the display's
position. The following list explains how to use the CRT adjust features.
The CRT adjust settings also affect the analyzer's built-in display.
C A U T I O N
2. If your external monitor is a sync-on-green-signal monitor, press the
4. For synchronizing your external monitor, use the
5. All of these settings are retained when the analyzer is turned off or preset,
4-104
(
)
Press
SYSTEM OPTIONS
is pressed a test pattern appears on the monitor(s). If you don't want the
test pattern on the display while adjusting it, press Remove PattBr~~ .
the display's position on the monitor. After pressing one of these softkeys,
use the front panel knob, the @) ($J keys, or the numeric keypad to vary
the position of the display on the monitor.
Porch , HoWrantal Da& Porch ,
the vertical and horizontal front and back porch times until the display is
optimal. Use Restare Defaults if necessary.
CRT