To Activate Markers; To Turn Markers Off - HP 8712ET User Manual

Rf network analyzers
Hide thumbs Also See for HP 8712ET:
Table of Contents

Advertisement

NOTE

To Activate Markers

1. Press the
MARKER
2. To activate markers 2 through 4, use the softkeys. For example, press
softkey
3:
to activate marker 3. To activate markers 5 through 8,
first press
More Markers
the marker you wish to activate.
3. Each marker, when activated, is either placed at its previous x-axis
value, or at the center of the x-axis.
Active Marker Definition
Although there may be up to eight markers on the display screen at one
time, only one marker can be "active" at any given time. The active
marker is designated by a triangle pointing down (∇) with the marker
number above it. Any other markers on the display are inactive and are
designated by a triangle pointing up (∆) with the marker number below
it. Any marker can be made active by selecting its corresponding softkey.
The active marker's values are always displayed in the upper-right
corner of the display screen, and you can modify the stimulus value of
the active marker using the front-panel knob, the
the numeric keypad.

To Turn Markers Off

1. All markers can be turned off by pressing
2. To turn off an individual marker, make it the active marker by
pressing its corresponding softkey, and then press
Active Marker Off
necessary).
ET User's Guide
key to activate marker 1.
and then the softkey that corresponds to
(accessed by pressing
Using Instrument Functions
Using Markers
keys, or
All Off
MARKER
More Markers
if
.
4-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 8714et

Table of Contents