The Markers Menus - HP 86140A Series User Manual

The Markers Menus

The Markers softkeys are accessed using the front-panel Markers key or the
Measure menu Markers selection on the menu bar. If you wish to change
marker settings, the following functions and setup panels are available:
Function
Active Marker....
Marker Trace....
Marker Bandwidth....
-3 dB, -6 dB, -10 dB, -20 dB
Marker Bandwidth Off
Peak Search
Marker to Center
Marker to Reference Level
More Marker Functions....
Marker Search Menu....
Search Mode
Noise Marker
Delta Marker
Trace Integration
Line Marker Menu....
Wavelength Marker 1
Using the Optical Spectrum Analyzer
See....
"To select the active marker" on page 3-23
"To set the active trace" on page 3-23 (Marker key)
"To set markers to measure bandwidth" on page 3-24
"To set markers to measure bandwidth" on page 3-24
"To perform a peak search" on page 3-25
"To perform a peak search using a marker" on page 3-24
"To change the center wavelength with a marker" on
page 3-24
"To change the reference level with a marker" on page 3-25
"To perform a peak search" on page 3-25
"To perform a pit search" on page 3-26
"To set the noise marker function" on page 3-27
"To set the delta marker function" on page 3-28
"To calculate the total power under a trace" on page 3-28
"To set the wavelength line markers" on page 3-28
The Markers Menus
3-21