Job Mode; General; Storing Settings As A Job - Fronius TPS 320i Operating Instructions Manual

Job mode

General

Up to 1000 jobs can be stored and retrieved in the power source.
This eliminates the need for manual documenting of the welding parameters.
"Job mode" enhances the quality of automated and manual applications.
Jobs can only be stored when in welding mode. When storing jobs, the process parameters
and certain machine defaults are taken into account in addition to the present welding set-
tings.
Storing settings
1
as a job
2
The list of empty jobs is displayed.
Empty list
3
76
Set the parameters that are to be stored as a job:
- Welding parameters
- Welding process
- Process parameters
- Machine defaults (if necessary)
Touch "Save as Job" in the right-hand ribbon
Touch the "Next" button
3
List with already stored jobs, e.g. EasyJobs
2
3