XPS Motion Controller/Driver
2.0
Getting Started
EDH0205En1051 – 10/17
2.1
Unpacking and Handling
It is recommended that the XPS Controller/Driver be unpacked in your lab or work site
rather than at the receiving dock. Unpack the system carefully; small parts and cables
are included with the equipment. Inspect the box carefully for loose parts before
disposing of the packaging. You are urged to save the packaging material in case you
need to ship your equipment.
2.2
Inspection for Damage
XPS Controller/Driver has been carefully packaged at the factory to minimize the
possibility of damage during shipping. Inspect the box for external signs of damage or
mishandling. Inspect the contents for damage. If there is visible damage to the
equipment upon receipt, inform the shipping company and Newport Corporation
immediately.
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional hazards to you. Contact Newport
technical support for advice before attempting to plug in and operate
damaged equipment.
2.3
Packing List
Included with each XPS controller are the following items:
• User's Manual and Motion Tutorial.
• XPS controller.
• Cross-over cable, gray, 3 meters.
• Straight-through cable, black, 5 meters.
• Power cord.
• Rack mount ears and handles.
If there are missing hardware or have questions about the hardware that were received,
please contact Newport.
Before operating the XPS controller, please read chapter 1.0 very
carefully.
WARNING
CAUTION
4
Quick Start