Adjustment Procedure By Auto Tuning - Mitsubishi MR-JE-10A Instruction Manual

6. NORMAL GAIN ADJUSTMENT

6.3.3 Adjustment procedure by auto tuning

Since auto tuning is enabled before shipment from the factory, simply running the servo motor automatically
sets the optimum gains that match the machine. Merely changing the response level setting value as
required completes the adjustment. The adjustment procedure is as follows.
Auto tuning adjustment
Acceleration/deceleration repeated
Yes
Load to motor inertia ratio
estimation value stable?
No
Auto tuning conditions
are not satisfied? (Estimation of
load to motor inertia ratio is
difficult.)
Yes
Set [Pr. PA08] to "_ _ _ 2" and set
[Pr. PB06 Load to motor inertia ratio]
manually.
Adjust response level setting so
that desired response is achieved
on vibration-free level.
Acceleration/deceleration repeated
Requested performance
satisfied?
Yes
End
6 - 16
No
No
To 2 gain adjustment
mode 2