Configuring Fabric Timers; Configuring Fabric Timers In System View; Configuring Fabric Timers In Vsan View - HP 5920 SERIES Fc And Fcoe Configuration Manual

Configuring fabric timers

The fabric operation involves the following timers:
Distributed service timeout period.
•
Error detection timeout period.
•
Resource allocation timeout period.
•
For more information about these timers, see FC-related protocols and standards.
You can configure fabric timers in one of the following views:
System view—The configuration takes effect on all VSANs.
•
VSAN view—The configuration takes effect only on the VSAN.
•
If you configure a fabric timer in both system view and VSAN view, the configuration in VSAN view
applies to the VSAN.

Configuring fabric timers in system view

Step
1. Enter system view.
2. Configure the global
distributed service timeout
period.
3. Configure the global error
detection timeout period.
4. Configure the global
resource allocation timeout
period.

Configuring fabric timers in VSAN view

Step
1. Enter system view.
2. Enter VSAN view.
3. Configure the distributed
service timeout period for
the VSAN.
4. Configure the error
detection timeout period
for the VSAN.
5. Configure the resource
allocation timeout period
for the VSAN.
Command
system-view
fc timer distributed-services value
fc timer error-detect value
fc timer resource-allocation value
Command
system-view
vsan vsan-id
timer distributed-services value
timer error-detect value
timer resource-allocation value
57
Remarks
N/A
The default setting is 5000
milliseconds.
The default setting is 2000
milliseconds.
The default setting is 10000
milliseconds.
Remarks
N/A
N/A
The default setting is 5000
milliseconds.
The default setting is 2000
milliseconds.
The default setting is 10000
milliseconds.