Snmp View Modify - Technicolor TG670 Cli Reference Manual

SNMP COMMANDS

snmp view modify

Modify a view family.
SYNTAX:
snmp view modify
where:
viewname
viewtree
type
storage
1024
viewname = <{V1View|View_all|basic_readview|
WanAdmin_readview|extended_readview|
WanAdmin_writeview|extended_writeview}>
viewtree = <string>
[type = <{include|exclude}>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
Configure the name of this family of view subtrees.
Configure an object identifier that identifies a subtree of a
MIB.
Indicate whether the subtree is explicitely accessible or not
in this family of view subtrees.
Configure the storage type.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL