Snmp User Add - Technicolor TG670 Cli Reference Manual

snmp user add

Add a snmp user.
SYNTAX:
snmp user add
where:
securityname
snmpengineID
authprot
authpass
privprot
privpass
storage
targettag
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
securityname = <string>
snmpengineID = <string>
authprot = <{usmNoAuthProtocol|
usmHMACMD5AuthProtocol|
usmHMACSHAAuthProtocol}>
[authpass = <string>]
privprot = <{usmNoPrivProtocol|
usmDESPrivProtocol|usmAESCfb128PrivProtocol|
usmAESCfb192PrivProtocol|
usmAESCfb256PrivProtocol}>
[privpass = <string>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
[targettag = <string>]
Configure a human readable string representing the name
of a user.
Configure the authoritative SNMP engine's
administratively-unique identifier, specified as hexadecimal
numbers (00-ff) and delimited with colons. Or use the
default value 'localSnmpID' to refer to the snmpEngineID
of the local SNMP agent.
Configure the authentication protocol to be used on behalf
of this user.
Configure a human readable string representing the user's
authentication password. The password will be converted to
a key.
Configure the privacy protocol to be used on behalf of this
user.
Configure a human readable string representing the user's
privacy password.
Configure the storage type.
Configure a human readable string used to select a set of
entries in the snmpTargetAddrTable for source address
checking.
SNMP COMMANDS
REQUIRED
REQUIRED
REQUIRED
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
1015