Snmp Notifyprofile Add - Technicolor TG670 Cli Reference Manual

snmp notifyprofile add

Add notify filter profile entry.
SYNTAX:
snmp notifyprofile add
where:
paramname
profilename
storage
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
paramname = <{V1Params}>
profilename = <>
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
Configure a name of a target Parameter defined in the
snmpTargetParamsTable.
Configure a name of a notify filter.
Configure the storage type.
SNMP COMMANDS
REQUIRED
REQUIRED
OPTIONAL
993