This Table Is Maintained In The Controller's Memory. The Maximum Table Length Is - HP storageworks HSG80 Reference Manual

CLI Command Descriptions
SET connection-name
Changes the operating characteristics of a host connection. Each path between a Fibre
Channel adapter in a host computer and an active host port on a controller is a
connection.
This command adds the specified host connection to the table of known connections.

This table is maintained in the controller's memory. The maximum table length is 96

connections; if the table contains 96 entries, new connections cannot be added unless
some old ones are deleted.
The SET connection-name command changes the operating parameters of the
specified host connection. A host connection is a specific instance of one host
connected to one port of one controller through one host adapter.
Syntax
SET connection-name
Parameters
connection-name
This is the name of the host connection. When a new host-adapter-port-controller
connection is made, the new connection is given a default connection name. The
default connection name is !NEWCONnn, where nn is a decimal number. The
connection name can be changed through the RENAME command.
Switches
The following switches are available for the SET connection-name command:
• OPERATING_SYSTEM
• RESERVATION_STYLE
• UNIT_OFFSET
These switches are described in the following paragraphs:
2–104 HSG80 Array Controller V8.7 Command Line Interface Reference Guide