SHOW stripeset-name
Displays information about the specified stripeset.
Syntax
SHOW stripeset-name
Parameters
stripeset-name
Specifies the name of the stripeset to be displayed.
Switches
There are no switches associated with this command.
Example
BOT> show S1
Name
------------------------------------------------------------------
S1
See Also
ADD STRIPESETS
DELETE container-name
SHOW STRIPESETS
HSG80 Array Controller V8.7 Command Line Interface Reference Guide
Storageset
stripeset
Switches:
CHUNKSIZE = 256 blocks
State:
NORMAL
M1
(member
M2
(member
Size:
0) is NORMAL
1) is NORMAL
142229246 blocks
SHOW stripeset-name
Uses
Used by
M1
M2
D4
2–185