Container-Name; Run - HP storageworks HSG80 Reference Manual

CLI Command Descriptions

container-name

Specifies the name of the container (device, storageset, or partition) being used to
create the unit.
A unit can consist of a maximum of 48 devices.
Switches
Table 2–1 lists all switches for the ADD UNITS command and identifies which
switches may be used with each type of device or storageset. Descriptions of each
switch follow the table.
Table 2–1: ADD UNITS Switches for New Containers
ENABLE_ACCESS_PATH
DISABLE_ACCESS_PATH
MAX_READ_CACHED_TRANSFER_SIZE
MAX_WRITE_CACHED_TRANSFER_SIZE
MAXIMUM_CACHED_TRANSFER_SIZE
PARTITION=partition-number
PREFERRED_PATH
NOPREFERRED_PATH
READ_CACHE
NOREAD_CACHE
READAHEAD_CACHE
NOREADAHEAD_CACHE

RUN

NORUN
WRITE_LOG
NOWRITE_LOG
2–34
Switch
HSG80 Array Controller V8.7 Command Line Interface Reference Guide