HP storageworks HSG80 Reference Manual page 82

CLI Command Descriptions
DELETE SPARESETS
Removes a disk drive from the spareset. The spareset contains disk drives that are
available for use, but not yet added to the controller configuration.
Syntax
DELETE SPARESETS disk-name
Parameters
disk-name
Identifies the disk drive being deleted from the spareset. Remove only one disk at
a time from a spareset.
Switches
There are no switches associated with this command.
Example
To remove DISK20300 from the spareset, enter:
DELETE SPARESETS DISK20300
See Also
ADD SPARESETS
SHOW SPARESETS
2–66 HSG80 Array Controller V8.7 Command Line Interface Reference Guide