Unit-Number - HP storageworks HSG80 Reference Manual

SET unit-number
Changes the characteristics of the specified logical unit.
Syntax
SET unit-number
Parameters

unit-number

Specifies the logical unit number to modify. The unit-number is the name given to
the unit when it was created using the ADD UNITS command.
Switches
Table 2–5 lists all switches for the SET unit-number command and shows which
switches can be used with each type of device and storageset. Descriptions of the
switches follow the table.
Table 2–5: SET unit-number Switches for Existing Containers
ENABLE_ACCESS_PATH
DISABLE_ACCESS_PATH
IDENTIFIER
NOIDENTIFIER
MAX_READ_CACHED_TRANSFER_SIZE
MAX_WRITE_CACHED_TRANSFER_SIZE
MAXIMUM_CACHED_TRANSFER_SIZE
HSG80 Array Controller V8.7 Command Line Interface Reference Guide
Switch
SET unit-number
2–145