Changing The Cli Prompt - HP storageworks HSG80 Reference Manual

Array controller v8.7
Hide thumbs Also See for storageworks HSG80:
Table of Contents

Advertisement

CLI Command Introduction
PARAMETER_NAME—The name of a parameter, followed by an equal sign and
the parameter variable. If a specific command specifies parameter names, they
must be entered in the command string. Parameter names are represented in this
guide in capitalized form.
parameter—When required in the command, parameters are used as one or more
words or phrases that supply necessary information to support the action of the
COMMAND. Note that not all CLI commands require parameters. Parameters are
represented in this guide as lowercase, italicized text.
SWITCHES—An optional word or phrase that modifies the command/parameter
string. Not all CLI commands require switches. Switches are represented in this
guide as capitalized, italicized text.

Changing the CLI Prompt

Change the CLI prompt display by using the SET controller PROMPT command.
Enter a 1- to 16- character string as the new prompt. For example, the prompt could be
changed to indicate the array controller type, such as "HSG>."
1–8
HSG80 Array Controller V8.7 Command Line Interface Reference Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents