HP storageworks HSG80 Reference Manual page 81

Array controller v8.7
Hide thumbs Also See for storageworks HSG80:
Table of Contents

Advertisement

DELETE remote-copy-set-name
Deletes a specified remote copy set. Upon completion of this command, the target unit
will no longer be a member of the remote copy set.
NOTE: This command works only in a DRM environment and requires an HSG80 array
controller with ACS version 8.7P code. Like all DRM commands, use of this command is heavily
restricted. Refer to the StorageWorks by Compaq Data Replication Manager HSG80 ACS
Version 8.7P Operations Guide for examples of usage.
This command works only on the site acting as initiator. This is the local site except in a failover
situation.
This DELETE command is only valid if the error mode of the remote copy set is
normal. The error mode is set by the ERROR_MODE switch of the SET remote copy
set command.
If the remote copy set is a member of an association set, the association set must be
deleted before the remote copy set is deleted.
Syntax
DELETE remote-copy-set-name
Parameters
remote-copy-set-name
The name given to the remote copy set that is to be deleted.
Switches
There are no switches associated with this command.
Examples
To delete RCS1, enter:
DELETE RCS1
See Also
ADD REMOTE_COPY_SETS
SET remote-copy-set-name
SHOW REMOTE_COPY_SETS
SHOW remote-copy-set-name
HSG80 Array Controller V8.7 Command Line Interface Reference Guide
DELETE remote-copy-set-name
2–65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents